Phone: 800-325-8999 Fax: 570-739-4424
|
Phone: 800-325-8999 Fax: 570-739-4424
|
|
Benefits of Plastic Valves and Flow Control Products Since the introduction of PVC in the U.S. during the 1940's, thermoplastic valves, pipe and fittings have gained wide acceptance. They are often the, material of choice for systems that were traditionally designed in metal. Unlike metal, however, plastic valves and components have a high resistance to corrosion, will not scale or rust, and will not contaminate sensitive fluids. Further, as non-conductors, they are immune to electrolytic and galvanic corrosion. Equally important, they contain nothing to leach out and contaminate sensitive fluids. Non-Toxic Hayward PVC and CPVC products are suitable for use with potable water and are consistent with the National Sanitation Foundation and Canadian Standards Association standards. Corrosion Resistance Hayward plastic valves and flow control products are immune to corrosion. They are dielectric - meaning they will not support a charge and will remain free from the ionization and corrosion that occurs with metal valves. Extended Service Life Hayward plastic valves will outlast most metal valves, and are not affected by normal weather conditions. They will provide years of maintenance-free service. Low Thermal Conductivity Hayward plastic valves have a high flow coefficient and, as compared to metal, will absolutely not pit, rust or corrode. Their interior walls are molded with an ultra-smooth finish that will remain smooth throughout the valves' service lives - resulting in more consistent flow rates over time. High TemperatureHayward process control products are capable of handling corrosive chemicals at elevated temperatures - up to 250F with glass-fiber-reinforced PPL. Easy InstallationHayward
plastic valves and flow control products are generally 1/3 to 1/2 the Hayward plastic valves are energy efficient. It take about half the energy to produce a Hayward plastic valve as a comparably-sized metal one. EconomicsWhen evaluating the economies of Hayward plastic valves over metal valves, consider not only the initial cost savings of the product, but the reduced freight, lower installation and maintenance costs and the extended service life of the valves. |
Send mail to info@dafehr.com
with questions or comments about this web site.
|
