fehrlogo.gif (869 bytes)

Phone:  800-325-8999     Fax:   570-739-4424

Elbows

Up Feedback Contents Search Terms of Use

 

D.A. Fehr Home
Up

Genova Products PVC Elbow Fittings

genovalogo.jpg (16143 bytes)

 

bullet

22 ½° Elbow (H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
22degelbowhxh.jpg (1320 bytes) 1½ 2551 70815 100 3,600
2 2552 70820 20 2,400
3 2553 70830 20 720
4 2554 70840 10 360
6 2556 70860 5 75
Used to change direction in piping. Sometimes called a 1/16 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

22 ½° Street Elbow (H x Spg)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
22degstelbowhxspgt.jpg (1112 bytes) 1½ 2561 75815 100 4,500
2 2562 75820 20 2,400
3 2563 75830 20 720
4 2564 75840 10 300
Used to change direction in piping. S2556ometimes 70860called a 1/16 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

45° Elbow (H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
45degelbowhxh.jpg (1242 bytes) 1¼ 2500 70614 50 2,400
1½ 2501 73615 100 2,700
2 2502 73620 100 1,200
3 2503 70630 20 540
4 2504 70640 10 270
6 2506 70660    
1½ Short Turn 70615-SHORT  100 2,700
2 Short Turn 70620-SHORT 100 1,200
Used to change direction in piping. Sometimes called a 1/8 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

45° Street Elbow (H x Spg)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
45degstelbowhubxspgt.jpg (1157 bytes) 1½ Short Turn 2401 72715 100 4,500
1½ Long Turn - 72716 100 4,500
2 2402 72720 100 1,800
3 2403 72730 20 540
4 2404 72740 10 270
6 2406 72760    
Used to change direction in piping. Sometimes called a 1/8 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

60° Elbow (H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
60degelbowhxh.jpg (1304 bytes) 1½ 2601 70915 100 3,000
2 2602 70920 20 1,440
3 2603 70930 20 540
4 2604 70940 10 270
Used to change direction in piping. Sometimes called a 1/6 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

90° Vent Elbow (H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90degventelboehxh.jpg (1077 bytes) 1½ 2201 70715 100 2,700
2 2202 70720 20 1,440
3 2203 70730 20 540
Used to change direction in "dry" portion of vent piping where water flow is not a consideration.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

90° Elbow (H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90degelbowhxh.jpg (1353 bytes) 1¼ 2250 72814 50 3,000
1½ 2251 72815 100 2,700
2 2252 72820 100 1,200
3 2253 72830 20 360
4 2254 72840 10 180
6 2256 72860    
4 x 3 2223 72834 20 240
Used to change direction in piping. Sometimes called a 1/4 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

90° Elbow with Side Inlet (H x H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90degellsideinlethxhxh.jpg (1421 bytes) 3 x 2 or1½* 2253 73131* 20 360
Used to connect a branch line or vent at a change of direction in a large vertical or horizontal pipe.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

*The inlet is constructed to accept a 2" fitting over its outside diameter or a 1 ½" pipe into its inside diameter.

 

bullet

90° Street Elbow (Spg x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90degstelbowspgxh.jpg (1349 bytes) 1½ 2451 72916 100 2,700
2 2452 72926 20 1,200
3 2453 72936 20 360
4 2454 72946 10 270
6 2456      
Used to change direction in piping. Sometimes called a street 1/4 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

90° Long Sweep Elbow (H x H)

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90deglongswelbowhxh.jpg (1230 bytes) 1½ 2276 73815 100 1,200
2 2277 73820 80 960
3 2278 73830 20 240
4 2279 73840 10 120
Used to change direction in piping. Sometimes called a long turn 1/4 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

 

bullet

90° Low-heel Inlet Elbow (H x H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
90deglhinletelbowhxhxh.jpg (1397 bytes) 3 x 2 or 1½* 2244 73031* 20 360
3 x 2 2245 73032 20 360
Used to change direction in piping. Sometimes called a 1/8 bend.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

*The inlet is constructed to accept a 2" fitting over its outside diameter or a 1½" pipe into its inside diameter.

 

bullet

Double 1/4 Bend (H x H x H)

 

Size (inch)

Sloane Part No.

Genova Part No.

Units/ Carton

Units/ Skid
dlbbendhxhxh.jpg (1619 bytes) 1½ 2261 70716 50  
3 2263   10 320
2 x 1½ x 1½ 2265 70722 20 1,200
Ideal for back-to-back sink or lavatory installations.
Go to Cross Reference Table (Genova, Sloane, Mueller, Charlotte, Nibco)

Prices subject to change without notice. 

 

Send mail to  info@dafehr.com with questions or comments about this web site.
Copyright © 1999-2007  D. A. Fehr, Inc.   Use of this site indicates that you accept the Terms of Use.
Last modified: April 17, 2007